See more Roof flashing & tape
Roof pro Grey Flashing Tape (L)3m (W)150mm
This weatherproofing flashing tape is a self-adhesive bituminous sealing strip which bonds instantly to provide a permanent watertight seal
- Suitable for: Flashing
Features and benefits
- An excellent alternative to lead
- Instantly weatherproofs
- Grey finish to mimic lead flashing
|Instructions for use||For porous surfaces, ensure surface is primed first. Cut the flashing tape to the required length. Remove the backing paper and lightly press into place. Overlap by at least 25mm. Use a wallpaper roller or similar to smoothen the tape and also to ensure a good, even contact is made with the surface|
Woodykeys - 8 months ago
More instructions for use would of been useful so I looked around. Use a heat gun, not one with a flame obviously and it doesn’t take a lot of heat and this stuff is stuck for good. You can even apply
the heat to the grey/silver side then use a roller to bed it in. I used this from a timber building onto a felt roof and this will never come off. This is not sticky to the touch when you remove the backing so you must use heat.
Vacuum2323 - 8 months ago
Literally useless wont stick to the paper it comes with....