See more Roofing felt adhesive
Roof pro Roof felt adhesive, 5kg
This solvent-based adhesive is suitable for bonding successive layers of roofing membranes and to bond overlaps on single layer installations that are nailed to timber.
- Ensure that all surfaces are clean, dry and free from oil, grease, dirt and organic growth. Porous surfaces should be treated with bitumen primer and allowed to dry thoroughly. Allow adhesive to develop a tacky surface before applying the next layer. Store in dry conditions at temperatures between 8 ̊C and 25 ̊C.
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Does what it says
Chris1980 - 1 year ago
Pretty good stuff for laying shed felt or repairing small patches. Used it to lay approx. 15 sqm of felt and there was still a little bit left over for any edges I missed. Used it to fill in the small joints in the shed roofing OSB sheets as well.
It is very thick and quite hard to lay, especially from cold. I would suggest like a previous reviewer said to stand it in warm water for a while before applying (wished i'd seen that review before laying my roof.) I used a trowel to spread it around as I thought it would be too thick for a brush.
Good value product
Vivski - 1 year ago
I've used this product for patch repairs and laying large areas of felt and it has performed well. Ensure that the adhesive is at the recommended temperature and it will spread easily ... I stood mine in a sink of hot water for 15 mins. with the lid slightly loosened and it was perfect.
It's so easy to work with PS wear good gloves
Anonymous - 2 years ago
It does what it says on the tin will buy again and the price is right