See more TV Wall Brackets
Ross Black Tilt TV mounting bracket 32-50"
This black matt cold rolled steel TV mounting bracket from Ross holds a maximum load of 30kg. For added versatility, it's adjustable so you can change the brackets' angle once installed. For easy installation, it comes with fixings supplied.
- Guarantee - 1 year
Features and Benefits
- Variable tilt to reduce screen glare
- Spirit level for accurate installation
- Adjustable mounting frame
- Fingertip tilt adjustment
- Cushioned pads for TV protection and improved audio
|Material||Cold rolled steel|
can take a larger screen than advertised
tv doctor - 7 months ago
its a good bracket , i install these for a living and this bracket can take 30kg the tv was 55 inch but only weighs 18kg so check the max load of the bracket you can save a fortune.the tv has been up 6 months now no problems
Easy to fit
Jojo 500 - 1 year ago
Purchased this to mount an LG 47" TV on the wall. Very easy to fit to the wall BUT don't trust the built in spirit level. I used an independent spirit level and I'm glad that I did as the built in level was out. Tilt adjust was easy use.
Great that it has a built in spirit level
Mazpez21 - 1 year ago
I bought this to mount my Sony tv. Unforunatley I needed an adapter to be able to do this which cost additional money on top of this purchase but overall I am pleased with how easy this was to mount on the wall. It's easy to use and position and the tv can easily be removed from the bracket as and when needed -
Eren64 - 2 years ago
Just what I needed thank you I would recommend.....
Does the job, but finger tip tilt?
John098 - 2 years ago
I chose this bracket from the limited range on offer. As it happened, it matched the screen size of my TV perfectly.
Structure-wise it's well made, but as I'll mention later its design is lacking.
The actual fitting to the TV and wall is straightforward enough. However, when fitting the brackets to the TV make sure you fit them with the adjusting knobs on the outside.
Fitting the main part of the bracket to the wall involves drilling four holes, either into brickwork or into plasterboard depending on your wall structure. That will also be the deciding factor as to whether you can make use of any of the screws etc. supplied. I had to buy fittings suitable for a plasterboard wall. Just make sure that any fittings you DO buy are no more than 6mm diameter, otherwise they won't fit through the slots on the base plate. I had to widen the slots to 8mm as the fittings bought at B&Q (Gripit) were wrongly described on their website as being 6mm. Bad show, B&Q.
The plate comes ready fitted with a spirit level. Don't trust it - mine wobbled vertically +/- a millimetre which to eagle-eyed critics would be enough to make a difference. Fortunately I had foreseen this and had already stuck on my own trusted spirit level, so I know for sure mine's horizontal. The TV, with brackets fitted, hooks onto this frame. Screws are then tightened from underneath (long screwdriver needed here.)
Now comes the fun bit. Box says: Fingertip tilt mechanism; not so. In fact, it involves a fair bit of heaving, pulling, tugging and quite a few expletives and I STILL can't adjust the thing to my satisfaction. As it happens, I will have to remove it from the wall temporarily in order to hide the cabling, so I'll deal with this matter again later.
Now then, what's the popular phrase? Does what it says on the tin? Not completely enough for me.
Brass Effect Steel Lightweight Bracket
This brass effect lightweight bracket is ideal for creating handy shelving. Guarantee - 1 year
Expamet Light Duty 100mm Angle Bracket
Made from galvanised steel to prevent rusting, this angle bracket is perfect for joining pieces of timber at a 90 degree angle. Guarantee - 1 year
Powder Coated Brown Steel Angle Bracket
This powder coated brown angle bracket is ideal for creating handy shelving. Guarantee - 1 year
Powder Coated Brown Steel Wood to Concrete Bracket
This powder coated brown wood to concrete bracket is ideal for creating handy shelving. Guarantee - 1 year