See more Sealers & Compounds
Rothenberger 28mm Pipe freezing kit
Our stores do not stock this product
This Rothenberger pipe freezing kit creates a temporary ice plug in water pipes, for emergency repairs that last up to 30 minutes. It's suitable for horizontal and vertical copper, lead and steel pipes 8-28mm in diameter.
- 1 year Guarantee
- Included: 1x 500g freeze spray, 2x quick freeze jackets and 4x cable ties
- Suitable for: Copper, lead & steel pipes
Features and benefits
- No need to drain the system
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Pipe dimension suitability||28mm|
Avoid at all costs
DisappointedUser2020 - 4 months ago
Followed the instructions to the letter when freezing the cold inlet to a basin (15mm copper pipe). Had to use 2.5 cans and not the recommend 0.5 can to stop the flow. Checked that the ice plug was solid and no water coming out of the tap. Went to cut the pipe (about 30cm away from the plug) and the plug came loose. Huge mistake and caused significant flooding. Not recommended at all.
shax ksk - 5 months ago
this didn't not work used it on 22mm pipe justbsould not freeze used whole can on one jacket and no luck had to drain down
Triesveryhard - 6 months ago
50% success rate. No idea why one failed to work but wouldnt risk it again.
Shaishi1 - 9 months ago
Had to freeze a copper pipe that I couldn't close from the mains. Froze it with a few bursts of spray from the can ( Preferred to use half of it to be on the safe side), replaced what I needed and I was done! Worked like magic.
I was abit weary of it thinking it wont hold the pressure but its amazing. Recommend using it if you have the same problem. It does take a while to unfreeze and to let the water back flowing so you need patience.
Does what it says
Kabir - 1 year ago
Bought this to cap my external lead pipe , super put foam around lead pipe insert tube and empty your load , froze straight away gave me time to cut pipe, shave and neatly file down clean and cap . Can’t fault it !