See more Plumbing Spanners, Tap & Waste Tools
Rothenberger Backnut Spanner
Our stores do not stock this product
This spinner is ideal for taps and toilet fixings. The product is 70mm in length and 70mm in width.
|Material||Zinc plated steel|
Ygs - 6 months ago
Needed this to tighten a 1/2 inch back nut. Yes it’s a little pricey but absolutely essential for taps and toilet fixings. Would definitely recommend.
Not long enough and didn’t actually fit
Nick4591 - 2 years ago
Way too short so could not turn it even when using the included pin handle -needed to be at least 10cm longer. Also did not actually fit the back nuts on the taps I had also purchase from B & Q. The backnut on the tap is larger by about 1mm. Going to return for a refund
Lumpy again - 2 years ago
Due to restricted access and tightness of nut this was aboit the only tool for the job coupled with a 32mm socket amd ratchet. Made a difficult job doable.
Good addition to plumbing kit
Steve148 - 2 years ago
I purchased this tool as I was replacing some taps in a very confined space. It was one of the best purchases I have made.All the times I have struggled with pipe grips made me wish I had bought this years ago.
Does the job!
Roadwarrior - 3 years ago
Removing taps where there is little space to manoeuvre can be a difficult job. Finding a box spanner like this is also a difficult job - only B & Q had the solution. Got the taps off in 5 minutes.