See more Wood varnish


Right chevron


Right chevron

Wood varnish

Right chevron
Rustins Quick Dry Varnish - Oak 1ltr

Rustins Quick Dry Varnish - Oak 1ltr

Sold & shipped by Rustins Limited


Size option

Previous arrow
Checking availability...

Product details

Product information

Available in several attractive wood shades in satin finish. Touch dry in 20 minutes and re-coatable in 2 hours. Suitable for all interior woodwork. Clean brushes in water.

  • Long lasting wood protection
  • Surface Preparation - Surfaces must be clean and previous coatings should be removed with Rustin’s Strypit Paint and Varnish Stripper. It is advisable to clean old surfaces with White Spirit to remove any wax or contamination, wipe away the solution formed with clean kitchen paper towels. Bare wood may be dyed with either Rustin’s Wood Dye before varnishing.
  • Guarantee - Statutory
  • Instructions for Use - Stir well before use. Apply liberally across the grain using a synthetic fibre brush specially made for water?based finishes. Finish off by brushing lightly with the grain, taking care not to over-coat. The first coat may be thinned with up to 10% water in very warm conditions. If the first coat raises the grain, sand lightly with fine abrasive paper before applying a further coat. The varnish will be touch-dry in approximately 20 minutes, depending on temperature and humidity. Further coats should be appplied after a minimum of 2 hours.
  • Suitable for Wood

Features and benefits

Low odour, quick-drying, non-yellowing on ageing. Touch dry in 30 minutes. Long Lasting wood protection. For all types of interior wood nterior, bare woodwork, cork, hardboard. Can also be used as a sealer for concrete, brickwork and plaster. Conforms to Safety of Toys Regulations BS EN 71 Part 3 2019. Clean brushes in water. Made in the UK.

  • Toy Safe & Food Safe
  • For all types of interior wood
  • Waterbased & quick drying, Satin Finish
  • Toy Safe & Food Safe
  • For Interior Use
  • Tough & Durable

Legal Information

  • Non-flammable. Flash point: Nil. General good practice advice: avoid contact with eyes, skin and clothing


Container typeTin
Application methodBrush or roller
Recoat time2 hours
Drying time20 min
VOC levelMedium
Product code5015332752539