Sculpted Wooden Garden Pergola Kit, 2.4m x 3.6m (Natural finish)

• Assembly required
• All our products are made from wood which is a raw material, therefore, there may be some splits and cracks that can appear in the wood from time to time which may come and go with changes in the weather. There is no need for any further treatment as the pressure treatment process can protect against rot for up to 15 years, however, like all wood, it will weather and season naturally over time. The products will turn an attractive silvery grey over the years. We would advise adding a furniture oil or linseed oil based product once a year just to replenish and moisturise the wood, which will also delay the weathering process. The timber can be painted or coloured using most softwood paints and stains if desired.
• Before you commence the assembly process, we recommend that you read these instructions thoroughly beforehand to familiarize yourself with the assembly process and to also check that you have the correct components. If for any reason you need assistance, you can find our contact details on the top of page of these instructions. We highly recommend that any assembly is carried out on a flat, level surface if possible and that you use another person to assist you if necessary.

Features and benefits

Take your backyard from ordinary to amazing using the Arbor Garden Solutions Pergola. Adding a pergola to your lawn turns an overlooked space into a wonderful outdoor room, and this unit brings a natural hint to the area. Its four, 4” x 4" legs support the top and stay rigid using six 2" x 6" main beams, the natural wood colour enhances your landscaping easily also available in brown finish. A bevvy of shade slats provides a comfortable sitting area, while the opening between each post creates plenty of room to move around and about the piece. All corner posts rounded and smooth. The redwood posts are supplied at 2.7m long to give the customer the option to concrete them into the ground, finishing the structure at 2.3m high, or the posts can be cut down to 2.3m for it to be a free-standing structure.

• Internal footprint between the uprights: 1.54m (6x rafter) x 2.6m (2x main beams)
• Please note that the advertised size is the length of the top rafters, the first dimension is for six runners on top and the second dimension is for two main beams. To calculate the footprint between the inner edges of the uprights you need to take 1m off the longest dimension and 86cm from the shortest dimension.
• Please note: The product colours shown are representative only and may differ on the actual product due to natural variations in the timber used.
• Its four (4.8m x 4.8m Pergola have 6 redwood posts), 4'' x 4" (90mm round smooth finish) legs support the top and stay rigid using six 2" x 6" main beams, the natural wood colour enhances your landscaping easily also available in brown finish. The redwood posts are supplied at 2.7m long to give the customer the option to concrete them into the ground, finishing the structure at 2.3m high, or the posts can be cut down to 2.3m for it to be a free-standing structure.
• Treated (rot-resistant)