Shelving bracket 0.05kg

Product information

The basic bracket to support all your shelving projects

• Fixings sold separately
• Compatible with 125 to 225mm shelves
• Locate wall studs and mark mounting locations on the top hole of the brackets, ensuring the holes are level. You should install brackets into all possible studs along the length of your shelf for stated load capacities. Partially install screw into marked holes at stud locations leaving a small gap for bracket adjustment. Place the top hole of the bracket onto screw and push down to secure. Use screws to secure the bottom of the bracket into the stud. Tighten down the top screw. Rest shelf on brackets. Use screws to secure the board to the brackets

Features and benefits

• Resistant: The epoxy finish prevents rust and ensures a long-lasting colour
• The maximum load shown may be lower depending on wall condition. All loads should be distributed evenly