See more Frost & water proofers
Product details
Product information
Quickly repair and Waterproofing of seams and needle holes on tents, bivvys, waterproof clothing and anything else that has non-watertight seams. Stormseal is a water-based aqueous styrene-acrylic type polymer dispersion seam sealer. The liquid soaks into pinholes and leaking seams and dries clear, leaving a flexible and impermeable waterproof surface. Contains no VOC’s and is non-toxic. Can be washed off before it has dried. Test on a small area first to check compatibility. This bottle (100ml) should cover 12m of seam (1” wide seam). Directions: Shake bottle well. Remove cap. Pour Seam Sealer into suitable container, cup or dish. Use brush supplied to apply as a film directly onto and covering the seam stitching or hole. Stormseal will soak into the stitching or hole. Allow to cure for 15-25 minutes or until clear and dry. Dries in a few minutes. Dries clear and transparent. Remains flexible and waterproof! DIRECTIONS Clean area. Remove cap and brush on a generous layer Stormseal using the foam pad by gently squeezing the bottle. Allow to seep in and cure for 15-25 minutes or until clear and dry.
- Guarantee - 1 year
- Shake bottle well. Remove cap. Pour Seam Sealer into suitable container, cup or dish. Use brush supplied to apply as a film directly onto and covering the seam stitching or hole. Stormseal will soak into the stitching or hole. Allow to cure for 15-25 minutes or until clear and dry.
Features and benefits
- Test on a small area first to check compatibility.
- Quickly repair and Waterproofing of seams and needle holes on tents, bivvys, waterproof clothing and anything else that has non-watertight seams.
- Stormseal is a water-based aqueous styrene-acrylic type polymer dispersion seam sealer. The liquid soaks into pinholes and leaking seams and dries clear, leaving a flexible and impermeable waterproof surface.
- Dries in a few minutes. Dries clear and transparent. Remains flexible and waterproof!
- This bottle (100ml) should cover 12m of seam (1” wide seam).
- Contains no VOC’s and is non-toxic. Can be washed off before it has dried.
- Directions: Shake bottle well. Remove cap. Pour Seam Sealer into suitable container, cup or dish. Use brush supplied to apply as a film directly onto and covering the seam stitching or hole. Stormseal will soak into the stitching or hole. Allow to cure for 15-25 minutes or until clear and dry.
Specifications
| Product weight | 100g |
|---|---|
| Volume | 100ml |
| Location | Interior & exterior |
| Drying time | Less than 1 h |
| Product code | 5060219661749 |