Stormsure Latex Wrist Seal Repair Kit (Bottle Neck Shape) - Extend Your Dry Suit's Life with Easy Repair or Replacement
Sold & shipped by Stormsure Ltd
Available online only and not stocked in B&Q stores
£19.99£222.11 per L
Product details
Product information
Revitalize your dry suit with the Stormsure Latex Wrist Seal Repair Kit, featuring a bottle neck shape for a precise fit. This comprehensive kit includes a 90g tube of Stormoprene one-part adhesive, specifically designed for marine repairs, ensuring a waterproof, durable bond. Whether you're looking to repair or replace the wrist seals of your dry suit, this kit provides all the essentials for extending the life of your gear, ensuring you stay dry and protected during your underwater or surface water activities.
- Guarantee - 1 year
- Suitable for Interior & exterior use
Features and benefits
- Quality Fit: Bottle neck shape latex wrist seals for a perfect match.
- Durable Repair: Includes Stormoprene 90g adhesive for a strong, waterproof bond.
- Extend Gear Life: Repair or replace wrist seals to prolong your dry suit's usability.
- Easy to Use: Simple instructions for quick repairs, even in field conditions.
Specifications
| Brand | Stormsure |
|---|---|
| Colour | White |
| Container type | Tube |
| Pack quantity | 3 |
| Product weight | 100g |
| Solvent-free | Solvented |
| Instructions for use | 1. Cut off the damaged seal, leaving the part of the suit where the factory seal is attached to the fabric. The new seal will be glued over the old factory seal edge. 2. Slide the new seal into the factory edge and put an elastic band or bungee around the suit to keep it in place. Slide some silicone/wax paper under the cut off edge to keep glue from sticking to the seal, or you can put wax on the seal. 3. Clean the edge of the suit and the new seal edge with solvent (the side with the stripes is the inside.) Gently sand paper it to roughen the surface. Do not let the seal stick out too far, as the small end of the seal should not be stretched over it. It might cause the new seal to slide out of position. 4. Slide the seal on over the factory rubber area. You can put elastic bands around to keep the new seal from sliding. 5. Roll back the new seal so that the 2cm edge that was over the old suit is now facing up. Apply a thin layer of Stormoprene Contact Adhesive to each side. Wait 5 minutes and apply a second layer of adhesive to each side. Use a spatula or knife to apply the glue. When the glue is touch dry, roll the new latex seal right into place over the rubber part of the old seal. It bonds instantly. Press firmly over the glue area to ensure full adhesion. 6. Take your time and it will work. |
| Volume | 90ml |
| Product code | 5060219661084 |
