Black Friday has landed! Brilliant low prices on selected tools, outdoor, furniture, Christmas & more. Shop now >>
See more Water heaters
TESY 200S Aqua Thermica Air Source Heat Pump
Sold & shipped by Modern Group Ltd
Available online only and not stocked in B&Q stores
Product details
Product information
The TESY AquaThermica is an all in one air-to-water, air source heat pump for generating hot water for domestic hot water and central heating. The TESY AquaThermica has a capacity of 200 litres of water and offers a maximum water temperature of 65 degrees. It has an internal sealed coil heat exchanger to allow a closed (unvented) connection to a central heating / under floor heating circuit. The appliance has an efficiency rating of A+ making it one of the most efficient water heaters in its class. It is powered by a single phase 230v power supply that is wired via a fused spur. The heat pump requires connection of 160mm diameter intake and exhaust air hoses, that connect to the top of the appliance. The AquaThermica offers a state-of-the-art, compact solution to creating energy efficient hot water for domestic and central heating hot water. It is an environmentally friendly product, operating with renewable energy sources resulting in lower CO2 emissions. The appliance is highly efficient with a precisely balanced refrigerant cycle due to an electronically commutated motor and an electronic expansion valve resulting in 75% lower electricity consumption when compared to similar sized electric hot water cylinders. The appliance includes a user friendly programmable LCD touch control screen and a built in diagnostics control system. It can operate in conjunction with other heat sources, such a conventional boiler or with other renewable energy sources, such as Solar PV Panels. Exhaust and Intake Hoses Not Included - 160mm diameter.
- Legal information: Must be Installed by a qualified installer
Features and benefits
Maximum working pressure 8 bar
Energy class A+
Diameter 630 mm
Maximum operational temperature 75 °C
Capacity 194 L
Thermo pocket x1 pieces
Heating time 8:59 h:min
Declared load profile L
Insulation (rigid PU) 50 mm
Electric heating element power 1.5 kW
HP maximum absorption 0.663 + 1.5 (e-heater) = 2.163 kW
Min. ÷ max temperature heat pump air intake (90% R.H.) -10 ÷ 43 °C
Frequency 50 Hz
Annual electricity consumption in kWh under average climate conditions 811.7 kWh
Power supply 230 V
Compressor Rotary
Min. ÷ max temperature installation site -10 ÷ 43 °C
Compressor protection Thermal circuit breaker with automatic reset
Maximum current in HP 3.1 + 6.5 (e-heater) = 9.6 A
Thermodynamic circuit protection type Safety pressure switch with automatic reset
Required overload protections 16A T
fuse/ 16 A automatic switch characteristic C (to be expected during installation on power supply systems)Fan Centrifugal
HP Maximum settable temperature 65 °C
Internal protection Single safety thermostat with manual reset on a resistive element
Nominal air capacity 314 m³/hMax. pressure head available 50 Pa
Motor protection Internal thermal circuit breaker with automatic reset
Condenser Wrapped externally not in contact with water
Transport weight 112 kg
Sound power Lw (A) 53 dB(A)
Automatic anti-Legionnella disinfection cycle YES
Height 1720 mm
Minimum height of the premise 1785 mm
Cathodic protection Mg anode Ø 32 x 400 mm
Defrosting 4-way valve
CoP (DHW) 2.9
Heat Pump Thermal Power yield (P rated) 1.1 kW
Degree of Protection IPX4
Refrigerant R134a
Refrigerant charge 880 g
CO2 equivalent 1287 t
Max. quantity of hot water at 40; V40; [EN16147:2017] 260 L
Average heat pump consumption [Condition EN16147:2017 A7/W55] 0.43 kW
Legal Information
- Must be Installed by a qualified installer
Specifications
Product code | 3800879310524 |
---|