Tikkurila Patio Paving Stain - For Garden Concrete Stones & Slabs - Water-Based - 3 Litres

Product information

Transform your patio with this user-friendly, water-based paving stain—ideal for revitalising garden concrete stones and slabs. Simple Application – Use a brush, roller, or spray to apply. We suggest that spraying is the most effective method for even coverage over larger areas (finishing with a roller or brush to aid in stain absorption). Durable & Penetrative – Designed to seep into the surface for a natural and lasting finish. *For use on industrially dyed or uncoloured patios. Not recommended for brand-new paving stones or non-absorbent surfaces like natural stone or wash concrete.

• Suitable for use on Brick, concrete & stone surfaces
• Surface Preparation - Clean surfaces from dirt, dust, moss and lichen. Wash surfaces with a pressure washer and use Tikkurila Tehopesu Power Clean according to instructions, if needed. If the pavings stones or slabs are relatively new, use turbo nozzle or at least sufficient pressure to ensure absorption capacity of the surface.
• Instructions for Use - Application Always make a trial application to find out the most suitable color, application method, amount of thinner and number of coats for the paving stones to be treated. Thin up to 50 % (2 parts of stain, 1 part of water). Stir the stain well before and during the use of the product. Apply with a brush, roller or knapsack spray. When using a knapsack spray, finish with a roller or brush, when necessary, to ensure that the product penetrates into the substrate pores. Apply evenly and without interruption to avoid overlapping. Avoid applying as thick layers as with paint. Undyed (concrete grey) paving stones and slabs: Choose the desired color from the Patio Paving Stone color selection. Apply 1-2 coats depending on the absorbency of the substrate and desired end result. Should you apply several coats, thinning for the first coat is recommended. Two coats are recommended for best results. Industrially dyed paving stones and slabs: Choose a color as close to the stones as possible. Apply 1-2 coats depending on the absorbency of the substrate and desired end result. Normally one coat is sufficient.

Features and benefits

• This paint is mixed specifically for to order; returns are only accepted if faulty or damaged in transit.
• For garden concrete stones & slabs
• Not suitable for new garden stones and non-absorbing surfaces
• Available in 10 attractive earthy shades
• Water-based with low VOCs
• Spray application is recommended for maximum absorption
• For already-coloured stones, select a similar shade for the patio stain
• Surface-dry (walkable) in approx. 3 hours (depending on the porosity of the wood)