TMech Paddle Mixer with 1600W motor

Use the soft start function to ensure you don’t splash mix everywhere then get up to the perfect speed with the variable speed dial. You can then keep the mixing party going by securing the power switch in the turned on position with the lock-on button.

Plaster Stirring, Paint Whisking, Paddle Mixer

Slow down or speed up the paddle using the variable speed control

Super powerful 1600W motor

Use the variable speed dial to slow down or speed up the mixing

Soft start helps to prevent splashing the mix everywhere

Hold the power switch in place with the lock-on button

Includes one pair of carbon brushes and spanners

No load speed of 180-700rpm

Lightweight body is easy to move between jobs

Mains powered with a 13A UK 3 pin plug

Consistent speed electric controller helps the speed to remain consistent throughout use to make sure materials are mixed effectively

Electric overload protection protects the motor against damage when trying to mix a large amount of materials, if the mix is too much for the motor it will stop and only start again when the load is reduced.

Temperature overload protection protects the motor from overheating when it has been used continuously for a long period of time. If the motor reaches a high temperature it will stop working, leave the machine to cool down for approximately 5 minutes before starting again and ensure the ventilation grilles are not blocked.

Specifications:

Voltage: 230V 50/60Hz

Power: 1600W

No load speed: 180-700 (min)

Dimensions: Length of Entire Paddle Mixer: 79cm / Motor Housing & Handle - 33cm W x 24.5 cm H x 19cm D / Length of Entire Paddle: 54.5cm / Length of Helical Section: 16.5cm / Diameter of Helical Section: 14cm

Weight: 6kg / 4.5kg without paddle