With seven teeth per inch, this high carbon
steel 500mm hand saw from B&Q is specifically designed for domestic and trade use, gives an universal cut. It comes with an ergonomically designed, plastic handle so you can work for a prolonged period of time. With a 45° & 90° angle ...
With 24 TPI (teeth per inch), this 300mm
long, steel hacksaw from B&Q is specifically designed to cut rough wood, green wood, branches, timber, battens, mdf, drywall, plasterboard and plywood. 300 mm Steel blade 24 teeth per inch Plastic handle handle
This compound mitre saw is ideal for cutting
steel, wood, aluminium & plastic. No load speed - 5500 rpm Maximum cutting depth at 90° - 70mm Maximum cutting length at 90° of 270mm Maximum mitre left - 47°/Maximum mitre right - 47° Blade diameter - 305mm
With eight teeth per inch, this c75 steel
500mm c75 steel blade tenon saw from Irwin is ideal for general purpose use, gives a fine finish cut, and is used with a push & pull cut direction. The triple ground teeth make short work of the material you need to ...