See more Sealants
UniBond Healthy kitchen & bathroom Mould resistant Dark grey Silicone-based Sealant, 300ml
Our stores do not stock this product
UniBond Anti Mould silicone sealant is specially formulated for use in bathrooms and kitchens, where resistance to mould growth is necessary.
- Completely remove any existing sealant and residues. Thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove nozzle cap and trim nozzle diagonally to fit the joint width. Screw the nozzle onto the cartridge. Insert cartridge into a cartridge gun. Pull trigger to apply sealant into the joint. Ensure sealant has good contact with both sides of the joint. Smooth sealant with a sealant finishing tool within 5 minutes. Remove excess sealant immediately using white spirit
Features and benefits
This anthracite-grey sealant forms a permanently flexible seal that is perfect for warm and humid environments.
- Mould resistant
- 20 mins touch dry
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||24 h|
|Resistant to mould||Mould resistant|
|Resistant to water||Waterproof|
|Standard||EN 15651 - 3|
not for showers
gaz64gaz - 3 months ago
Sealed my shower tray and glass, sealant started coming away within days.
Also very runny and hard to smooth over to get a good finish.
Muddy Boots - 2 years ago
This stuff is very runny. Combined with the fact that it skins over almost instantly makes it almost impossible to smooth neatly. I've used countless different sealants and this is definitely the worst. On a more trivial note, it smells like a blocked drain.