See more Sealants
UniBond Go seal Mould resistant Translucent Kitchen & bathroom Silicone-based Sealant, 100ml
Our stores do not stock this product
UniBond GO SEAL is an anti-mould silicone sealant suitable for most sanitary sealing tasks.
- Ensure surfaces are clean and dry. Remove safety tab and nozzle cap. Rotate nozzle to preferred position. Release trigger by sliding switch to open positioning. Product may not dispense correctly if not fully open. Press trigger to dispense sealant into the joint. Smooth immediately. Remove excess sealant with spirit. Product dries in 24 hours. Once finished, slide switch to close and replace the cap.
Features and benefits
This silicone sealant is versatile and durable for use in the bathroom.
- No cartridge gun needed
- Mould resistant
- Flexible and discreet
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||24 h|
|Resistant to mould||Mould resistant|
|Resistant to water||Waterproof|
|Room use||Kitchen & bathroom|
|Standard||EN 15651 - 3|
KFThomas - 1 month ago
I bought this can because it was just for a small job and I didn't want to waste a large tube. I regret it. The trigger function is tricky to use and temperamental but I persevered and it eventually worked. Most disappointingly, the silicone comes out full of bubbles which you can still see once it's set. I chose clear sealant for a discreet finish but now all I can see are the bubbles. I wish I'd just gone for a normal tube and sealant gun.