See more Sealants
UniBond Healthy kitchen & bathroom Mould resistant Light Grey Silicone-based Sanitary sealant, 300ml
UniBond Anti Mould silicone sealant is specially formulated for use in bathrooms and kitchens, where resistance to mould growth is necessary.
- Completely remove any existing sealant and residues. Thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove nozzle cap and trim nozzle diagonally to fit the joint width. Screw the nozzle onto the cartridge. Insert cartridge into a cartridge gun. Pull trigger to apply sealant into the joint. Ensure sealant has good contact with both sides of the joint. Smooth sealant with a sealant finishing tool within 5 minutes. Remove excess sealant immediately using white spirit
Features and benefits
This concrete-grey sealant forms a permanently flexible seal that is perfect for warm and humid environments.
- Mould resistant
- 20 mins touch dry
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||24 h|
|Resistant to mould||Mould resistant|
|Resistant to water||Waterproof|
|Standard||EN 15651 - 3|
More like DARK grey!
Poppyweed - 1 month ago
This is nothing like 'light grey'. Must only be called this as their other version is darker (which must be almost black). Returned for refund ok, but wish I had read the other reviews first as I had to rip it all off and start again.
Absolutely stinks and comes off easily
Kempo73 - 7 months ago
I bought the dark grey and the colour was perfect. Unfortunately, the acidic smell is overpowering we had to open all the doors and windows and it still took a day to go away completely. Once it had completely dried I wiped around it and it just came of in little clumps so totally useless. Will be looking for an alternative!
Grey? I dont think so
Tarif - 7 months ago
Nothing to say other than its not light grey. Waste of time and money
Sealant fine but more mid-grey than light grey
Rich82 - 10 months ago
Sealant good enough and application / adhesion as expected. Agree with other comments that this is not light grey as advertised. I'd read those reviews and bought anyway as didn't really affect me, so was fine for my application. But can appreciate for others that may be a problem. Photo shows sealant after 24 hours.
Plain Acidic Silicone
ivan123 - 1 year ago
Really bad Acidic smell, not really light grey, more normal grey color. Adhesion is poor when compered to other twice cheaper products on the market.