See more Sealants

Home

Right chevron

Sealants

Right chevron
Zoom inZoom outZoom reset
UniBond Healthy kitchen & bathroom Mould resistant White Silicone-based Sanitary sealant, 200ml

UniBond Healthy kitchen & bathroom Mould resistant White Silicone-based Sanitary sealant, 200ml

£11.98
Loading
Checking availability...
Loading
Checking availability...

Product details

Product information

UniBond Anti Mould silicone sealant is specially formulated for use in bathrooms and kitchens, where resistance to mould growth is necessary.

  • Completely remove any existing sealant and residues. Thoroughly clean the joint to remove contaminants and allow to dry. Remove the safety tab and nozzle cap. Slide switch fully to "Max." to release trigger. Product may not dispense if not fully open. Rotate nozzle to preferred angle. Press trigger to dispense sealant. When applying, ensure sealant has good contact with both sides of the joint. Smooth sealant with a sealant finishing tool within 5 minutes. Remove excess sealant immediately using white spirit
  • Solvent-free

Features and benefits

This white sealant forms a permanently flexible seal when dry, making it perfect for warm, humid environments.

  • Waterproof and sanitary
  • Mould resistant
  • 20 mins touch dry

Health and safety

Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

Specifications

BrandUniBond
BaseSilicone-based
ColourWhite
Drying time24 h
Pack quantity1
Product weight336g
Resistant to mouldMould resistant
Resistant to waterWaterproof
StandardEN 15651 - 3
Volume200ml
Product code5010383317041

Reviews

Full star
Full star
Empty star
Empty star
Empty star
2 / 5(1 reviews)

Great sealant but very hard to apply.

Full star
Full star
Empty star
Empty star
Empty star

Robert12 - 10 months ago

The sealant gushes out under compressed air at a constant rate and constant size of bead. It is not possible to cut the nozzle to a different size or to moderate the flow if required. I will not buy again.