See more Sealants
UniBond Perfect finish Translucent Glazing Sealant, 300ml
Our stores do not stock this product
UniBond Glazing silicone sealant is specially formulated for the glazing and installation of windows and door frames.
- Included: Nozzle included
- Completely remove any existing sealant and residues. Thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove nozzle cap and trim nozzle diagonally to fit the joint width. Screw the nozzle onto the cartridge. Insert cartridge into a cartridge gun. Apply sealant into the joint, ensuring that the sealant does not come into contact with the glazing seal. Smooth sealant with a sealant finishing tool within 5 minutes. Remove excess sealant immediately using white spirit.
Features and benefits
This clear sealant is highly versatile and an be used on glass, metal, brick, concrete, wood and PVC.
- Appropriate for both inside or outside the house
- UV resistant
- Adheres to most common building materials
- Discreet and durable
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||24 h|
|Odour level||Low odour|
|Resistant to ultraviolet||UV resistant|
|Resistant to water||Waterproof|
|Standard||EN 15651-1 F INT-EXTEN15651-2 G|