See more Sealants
UniBond Re-New Mould resistant White Kitchen & bathroom Silicone-based Sanitary sealant, 100ml
Features and benefits
- Apply on top of exisiting sealant, revives old or damaged sealants, no need to remove the old
- Triple Protect Mould resistance: Repels, kills and prevents mould
- Integrated smoothing tool for a perfect finish
- Easy to apply, clean and correct
- Good adhesion to existing sealant incl. silicone
- Enough for one standard bathroom suite
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||6 h|
|Resistant to mould||Mould resistant|
|Room use||Kitchen & bathroom|
Poor product, poor applicator
Alan John - 1 month ago
I bought this to renew my bathroom real as it was showing signs of age. The applicator is really inferior compared with gun sealants and because you have to squeeze it by hand it's very hard to get a consistent pressure on the applicator. You also get an inferior bead quality compared with using a gun. This will go in the bin and I'll buy something I can put in a sealant gun.
Utter garbage, avoid.
CCBristol - 1 month ago
AVOID. Absolutely terrible product.
1. Application tube needs two hands and is
difficult to use.
2. Applicator head doesn’t create a bead, it does create a mess.
3. The cream that comes out varies in flow and consistency.
4. The cream gets everywhere and makes a real mess of your surfaces.
5. The cream can be wiped off with a damp
cloth. Which is just as well.
No idea how this got to market, shame on Unibond.
Mickolos1 - 3 months ago
Appallingly product. Brilliant idea, execution leaves a lot to be desired (and it's not me, I'm very adept at all DIY). Just done a double shower. Would have been far quicker taking off the old stuff and totally reapplying a new bead of proper sealant. Tool kept coming off, meaning sealant went all over. Trying to constantly squeeze the tube whilst maintaining movement and contorting yourself into these places where it's needed most, is just not achievable.
Probably OK for a sink, anywhere else forget it. Use a normal tube with gun and applicator to save the time, mess and stress.
JHC1 - 4 months ago
Purchased the product to go over the older grout on a shower/bath wall. The product details gives the impression that, as long as you pre clean the old grout it brings it up a treat - easy to use - perfect finish.
Utter rubbish - what it doesn't say or show is that this is possibly only good for the actual edging joint where bath/shower meets the wall. Anything higher and it fails. Indeed, I spent more time clearing off the mess than putting on the few attempts I made. It does not like going sideways, certainly you cannot do the top lines or wall joints as won't reach in, spread or allow sealant out. As said, maybe only useful for bath to wall grout/seal.
I've thrown it in the bin - waste of money and time - misleading information.
1st ok.. 2nd dreadful
Bnq it - 10 months ago
The first strip i did was beautiful! Perfect neat line over old sealant. ...then it built up on the head and got messy. Started not coming out. Not being neat. Bought another the next day and lid kept popping off.
Nice idea could see potential but neither worked :( big waste of money and very messy shower.