See more Tiling Adhesives
UniBond Ready to use Wall tile adhesive & grout, Ice white 1.28kg
Our stores do not stock this product
This wall tile adhesive & grout is waterproof and suitable for porcelain, ceramic and mosaic wall tiles, max size 400 x 400 mm.
- For use on - Suitably prepared rigid walls
- Recommended for - Showers, bathrooms and kitchens
- Water, heat and mould resistant
- Suitable for splash areas
Features and benefits
- 2 in 1 adhesive and grout
- Triple Protection anti mould
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Colour description||Ice white|
|Drying time||24 hours|
|Ready to grout||24h|
Great, easy to use.
Screwd - 1 month ago
Used to re grout my kitchen tiles went on easy and not too messy
April55 - 6 months ago
Product was runny and wouldn't stay on the wall, kept dribbling and couldn't get tile to stick because the adhesive had run.
Snardo - 2 years ago
Good product, but why don’t you do smaller containers, only used small amount and will now go hard by the time I come to use again.
Not Fit for Purpose
cool for cats - 2 years ago
I bought this approx 3 weeks ago to repair cracked grout in the splash area of the shower. The old grout was thoroughly raked out from the tiles all along the lower area of the shower, the gaps thoroughly cleaned and allowed to dry for 24 hours. After then checking to make sure the area to be grouted was dry the grout was given a good mix and applied making sure that all the gaps between tiles were filled and not just skimmed over. The joints were smoothed and the area was cleaned using a damp cloth taking care not to touch the grouted area. and left to dry as stated on the instructions for 24 hours. After 24 hours the grout was polished and left for a further 12 hour before using the shower.
After using the shower for 3 days I noticed the new grout was starting to wash out, after checking all grout it was now soft. I contacted the Unibond help line to see if they could throw some light on the problem and was told I should have left it to dry for 48 hours contrary to the instructions on the tub, this was pointed out and also that the grout was allowed a further 12 hours to dry on top of the advised 24 hours. After giving the batch number and date from the lid I was told that somebody would contact me from the next level up in 2/4 days then the line went dead!!!
Waited 2 days, no phone call and rang back. Told that a guy called Alex would call, but it could take a few days or up to 8 weeks!!! Now that is great customer support, I think not. Probably best if they removed the contact number from the tub.
At this stage tape was being used to cover where some of the grout was coming out so that the shower could be used. The images show the tape and more grout coming out, at this stage the Unibond product was returned to B&Q who immediately refunded and supplied an alternative produce, not Unibond. The defective material was raked out and exactly the same procedure was carried out regarding application and wait time with perfect results.
5 stars to B&Q for their customer support, they deserved it, but Unibond -5 stars for their disgraceful customer helpline support.
Unibond Ready to Use Wall Tile Adhesive & Grout,
jk72 - 2 years ago
quality Adhesive & Grout, very happy would buy again .