See more Tiling Adhesives
This wall tile adhesive & grout is waterproof and suitable for ceramic and mosaic wall tiles, max sixe 300 x 300 mm.
- For use on - Suitably prepared rigid walls
- Recommended for - Bathrooms and kitchens
- Water, heat and mould resistant
- Suitable for splash areas
Features and Benefits
- 2 in 1 adhesive and grout
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||24 hours|
|Ready to grout||24hours|
Ben4321 - 4 months ago
I used this on a previously installed plasterboard, which had also been primed prior to tiling, but after 12hrs of allowing the adhesive to dry various tiles when grouting would just fall off. I thought it might have been the primer so i tried another area of plasterboard with no primer, same thing happened. I then changed to Mapie ShowerProof adhesive and it was fantastic, no dropping of tiles and the grab was brilliant. I would not recommend this product for an adhesive.
PMurthy - 1 year ago
Very difficult to work with. 24hrs post tilling, tiles are falling off the wall... redoing the same job. waste of time and money.
Tub full of water and settled adhesive
johnboy1961 - 2 years ago
Bought a tub today from B and Q full of water on the top and settled material in the bottom, stirred it up hoping it would thicken to use and tried to tile wall, the adhesive just ran off the wall not impressed.
Going back to B and Q Hinckley tomorrow for refund
Don't buy! Utter rubbish
Jackieme - 2 years ago
Costa a fortune because you have to buy that much and after 2 days it was still wet and pointless. Avoid avoid avoid
Wall tile adhesive & grout
Hughac - 2 years ago
It was great and easy to use . I would recommend to anyone.