UniBond ReNew White Water-based Bathroom & kitchen Sanitary sealant, 80ml

• Guarantee - Statutory
• If existing sealant is damaged, poorly bonded or leaking then the sealant must be removed and replaced. Application: Remove the cap and position the applicator at an angle (approx. 45°) to the joint, so that the edges of the applicator have full contact with both faces of the joint. Squeeze out the product while moving the applicator along, in case of vertical joints it is advisable to apply UniBond Re-New starting from the base. If necessary, repeat the smoothing process with the applicator. Clean applicator after use and replace the cap. Drying time: Allow to dry at least 6 hours before allowing water contact. Allow to dry for at least 24 hours before contact with cleaning products.
• Do not use on bituminous substrates or on building materials which might bleed oils, plasticisers or solvents which could attack the product. Not suitable for areas of constant immersion or permanent damp. Not suitable for use for use on mirrors or for natural stones.
• Solvent-free
• Resistant to heat, mould & ultraviolet. Waterproof

Features and benefits

• Silicone coating to refresh existing silicone sealant
• Apply directly from a unique applicator bottle with built in smoothing tool
• Excellent adhesion on existing old silicone sealants
• Mould resistant
• Easy to apply
• Suitable to cover coloured silicones (coating thickness ≥ 1mm)
• No extra tools needed
• Initial water contact after 6 hours, fully cured in 24 hours