See more Sealants
UniBond Speed Mould resistant Translucent Kitchen & bathroom Silicone-based Sanitary sealant, 200ml
UniBond Speed silicone sealant is perfect for use in warm and humid environments such as bathrooms and kitchens, where resistance to mould growth is necessary.
- Completely remove any existing sealant and residues. Thoroughly clean the joint to remove contaminants and allow to dry. Remove the safety tab and nozzle cap. Slide switch fully to "Max." to release trigger. Product may not dispense if not fully open. Rotate nozzle to preferred angle. Press trigger to dispense sealant. When applying, ensure sealant has good contact with both sides of the joint. Smooth sealant with a sealant finishing tool within 5 minutes. Remove excess sealant immediately using white spirit
Features and benefits
This quick and easy sealant is specially formulated for use around baths, showers, basins and sanitary ware.
- Dries in 1 hour
- Mould resistant
- No cartridge gun needed
- Transparent for discretion and versatility
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||1 h|
|Resistant to mould||Mould resistant|
|Resistant to water||Waterproof|
|Room use||Kitchen & bathroom|
|Standard||EN 15651 - 3|