See more Sealants
UniBond Triple protection Mould resistant Translucent Kitchen & bathroom Silicone-based Sealant, 300ml
Our stores do not stock this product
UniBond Stop Mould is an anti-mould silicone sealant specially formulated for use in warm and humid environments such as bathrooms and kitchens, where resistance to mould growth is necessary.
- Completely remove any existing sealant and residues. Thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove nozzle cap and trim nozzle diagonally to fit the joint width. Screw the nozzle onto the cartridge. Insert cartridge into a cartridge gun. Pull trigger to apply sealant into the joint. Ensure sealant has good contact with both sides of the joint. Smooth sealant with a sealant finishing tool within 5 minutes. Remove excess sealant immediately using white spirit
Features and benefits
This sealant contains the Triple Protect formulation that repels water, prevents mould growth and protects the joint from water ingress.
- Suitable for showers, bathrooms, kitchens, baths, toilets, wet rooms, worktops, tiled areas, sinks and basins
- Appropriate for use in power showers
- Flexible and discreet
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||24 h|
|Resistant to mould||Mould resistant|
|Resistant to water||Waterproof|
|Room use||Kitchen & bathroom|
|Standard||EN 15651 - 3|