See more Sealants
UniBond Weather-guard Grey Roof & gutter Sealant, 0.3L
UniBond Extreme Repair takes care of the bonding and sealing of interior and exterior window frames, roofing, guttering, cladding, double glazing, mirrors, polystyrene.
- Completely remove any existing sealant and residue. Thoroughly clean the joint to remove contaminants and allow to dry. Cut off the tip of the cartridge above the screw thread. Remove nozzle cap and trim nozzle diagonally to fit the joint width. Screw the nozzle onto the cartridge. Insert cartridge into a cartridge gun. Pull trigger to apply sealant into the joint. Ensure sealant has good contact with both sides of the joint. Smooth sealant with a sealant finishing tool within 5 minutes. Remove excess sealant immediately using white spirit.
- Roof & gutter
Features and benefits
This grey sealant will bond and seal in all kinds of situation, even on damp surfaces.
- Suitable for both indoor and outdoor use
- Can be used as a bedding compound
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||2 days|
|Minimum touch dry time||0.22h|
|Resistant to ultraviolet||UV resistant|
|Resistant to water||Waterproof|