• Surfaces must be clean, dry and close fitting. Unscrew the cap and apply a thin, even coat of adhesive to both surfaces, especially at the edges, using a serrater spreader or clean, short bristled brush. For best results, apply the adhesive at a temperature of 18°C to 25°C. Replace the cap immediately. Allow the adhesive to dry for 5-10 minutes until touch dry. Carefully align parts and press together. Apply firm pressure for a few seconds from the centre of the bonded area outwards. Bonding will be instant and not repositionable, provided full strength within 24 hours

Features and benefits

• It bonds leather to many materials
• Replace cap immediately. Store tube in blistercard in cool and dry conditions