See more Paint

Home

Right chevron

Paint

Right chevron
Left chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
Valspar Premium Exterior uPVC & composite Multi-surface Satin Paint, Base 2, 750ml
Right chevron

Valspar Premium Exterior uPVC & composite Multi-surface Satin Paint, Base 2, 750ml

Sold & shipped by B&Q

£
30
£
40
per l
Info

Sorry, the colour you chose is not available in this base. Please select a different colour or finish.

Product details

Product information

    Valspar Premium uPVC & Composite delivers exceptional coverage, fast and easy application and includes 10 year protection. Its high-quality, water-based formula is showerproof in 1 hour and provides a tough and durable finish to your uPVC or Composite windows and doors. Valspar Premium uPVC & Composite is mould and stain resistant and flexible to prevent cracking, giving your windows and doors protection with no primer required. With Valspar you can have any colour, no compromise.

    • Suitable for uPVC & composite
    • Stain resistant
    • Washable
    • Surface Preparation - For new uPVC wait at least 12 months before painting. Ideally, wait for a dry day above 10°C, and not likely to rain. Cold, wet weather can stop the paint from drying properly. Make sure the area you're painting is clean, dry and free from dirt, dust & grease. Sand the area to give an even finish and good adhesion. For best results, sand with fine sandpaper, wash the surface with warm soapy water, rinse and leave to dry thoroughly before painting. Make sure the surface is smooth, any damaged areas will need repairing before painting. If you're painting over previously painted uPVC and the paint is in good condition, give the surface a light sand for good adhesion. If it’s flaking or cracked, you’ll need to sand it first, clean up any dust and wipe with a damp cloth. You can apply our uPVC Paint directly to the surface without the need of a primer.
    • Instructions for Use - Give the paint a good stir. Paint with a brush or roller. Leave to dry for 2-4 hours and apply your second coat. If you’re painting over a dark colour you may need to put a third coat on. For best results, lightly sand in-between coats and wipe with a cloth to remove dust. Your last coat will be waterproof in 1 hour.
    • Guarantee - Statutory

    Features and benefits

    • Resists cracking & flaking
    • Mould & stain resistant
    • No primer needed
    • Rainproof in 1 hour
    • Suitable for Composite
    • 10 Year Protection

    Health and safety

    Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

    Specifications

    BrandValspar
    Application methodBrush or roller
    BaseWater-based
    Coverage7.5m²
    Drying time4 h
    FinishSatin
    Instructions for storageProtect from frost
    LocationExterior
    Maximum application temperature25°C
    Minimum application temperature10°C
    Minimum touch dry time1h
    Number of coats2
    Paint base densityMedium base
    Recoat time2-4 hours
    VOC levelLow
    Volume750ml
    Product code5056402400172

    Documents

    Safety Data Sheet