See more Paint


Right chevron


Right chevron

Valspar Premium Masonry Exterior Basecoat, Base 2, 10L

Sold & shipped by B&Q

Left chevron
Zoom inZoom outZoom reset
Valspar Premium Masonry Exterior Basecoat, Base 2, 10L
Right chevron
per L

Size option

Previous arrow

Sorry, the colour you chose is not available in this base. Please select a different colour or finish.

Product details

Product information

A premium masonry paint with a microporous film, making it breathable and tough for long term protection.

  • Suitable for Masonry
  • Stain resistant
  • Scrubbable
  • Surface Preparation - The surface must be clean, dry and free of dirt, chalk and grime. Glossy surfaces should be lightly sanded before painting. Repair all damaged areas. Lightly sand old, loose or flaky paint. If mould, moss, algae or lichen are present, they must be completely removed. Apply a solution of 1 part bleach and 3 parts water. Rinse thoroughly. We recommend to seal absorbent surfaces with an Exterior Primer & Undercoat.
  • Instructions for Use - Stir contents to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paint’s wet edge and finish with gentle, vertical strokes. Avoid excessive rolling or brushing. Extra coats may be required when making dramatic colour changes. Do not thin this product. Dries to the touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.
  • Guarantee - Statutory

Features and benefits

Valspar® Premium Masonry can be applied to almost any exterior stone surfaces for durable, long term colour and protection. It’s showerproof in just 30 minutes and can even be applied to damp surfaces. Valspar® Premium Masonry also has built in self-cleaning technology and is UV resistant so it won’t crack, blister or peel, ensuring your surface is protected against harsh weather conditions.

  • Self-cleaning
  • Microporous & Breathable
  • Showerproof in 30 minutes
  • Long-lasting Colour
  • We want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up, so you are sure that this is the right colour for you.
  • This product has a Valspar Love Your Colour Guarantee
  • We’re unable to offer refunds or to exchange products that have been mixed to your individual requirements. If the product you purchase is faulty, or not as described, we may offer an exchange, refund or repair as appropriate. This does not affect your legal rights.


Application methodBrush, roller or spray
Drying time30 min
Instructions for storageProtect from frost
Maximum application temperature25°C
Minimum application temperature10°C
Minimum touch dry time0.5h
Number of coats2
RangePremium Masonry
Recoat time4 hours
VOC levelMinimal
Product code5055018189570