See more Wood Furniture Paint & Treatments
Valspar Pure brilliant white Satin Metal & wood paint, 2.5L
Our stores do not stock this product
- Instructions for use - For interior use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. Stir contents thoroughly to ensure paint is evenly mixed. Purchase enough paint to complete the job, if you feel that you may run out of paint, stop at a corner or natural break. Apply 1-2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paints wet edge and finish with gentle strokes along the wood grain. Avoid excessive rolling or brushing. Extra coats may be required when making dramatic colour changes. Do not thin this product. Dries to the touch in about an hour under normal conditions. Allow 2-4 hours between coats.
- Suitable for Metal & wood
- The surface must be clean, dry and free of dust and grease. Gloss surfaces should be gently sanded before painting. Repair all damaged areas, remove old, loose or flaky paint. Cover the surrounding area whilst decorating to provide protection against paint spills. Valspar Interior Primer & Undercoat is required when sealing new, bare wood and previously coated wood and metal surfaces.
Features and benefits
- Fast & easy application
- Recoat in 2 hours
- High sheen finish
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Application method||Brush, roller or spray|
|Colour||Pure brilliant white|
|Drying time||1 h|
|Recoat time||2-4 hours|
|Minimum touch dry time||1h|
Very poor paint
Mickey 22 - 1 month ago
I bought 3.. 5 litre tins of this paint in different colours for decorating the 2 bedrooms and living room after 3 coats it was still rubbish patchy all over.i bought a cheaper paint which done the job a lot better.
Never again will I use Valspar even if they were giving it away
Don’t waste your time or cash
Young un - 2 months ago
Useless product, even at the clearance price I wish I hadn’t picked this up. Four coats and still looks like another four wouldn’t cover the doors I’m painting. Going to get a different brand to do the job
In the bin
Anonymous - 3 months ago
Waste of time and money, this was thin, dripped, showed every single brush stroke. Just awful. Have several valspar paints and they are fantastic so thought would be of quality. Valspar what were you thinking?
Anonymous - 3 months ago
Streaky, watery product do not waste your money even on clearance
Not bad but not the best
Pen2019 - 4 months ago
Bought this to do skirting, architraving. Doors and staircase. After applying the Valspar undercoat .. which is fine .. I put two top coats on and it still looked weak. It doesn’t really give a high density highly pigmented finish so rather than buying another tin of the same I did a third coat in Dulux .. tbh I’d buy the base coat again but not the top coat but if I had a tighter budget then I can’t say it’s rubbish .. it’s just that there is better available Burbank it cost more .. the old classic you get what you pay for .