See more Paint
Valspar Simplicity Interior Wall & ceiling Matt Emulsion, Base A, 2.5L Soft Focus R129A
Sorry, this product is currently out of stock.
Valspar Simplicity Interior Wall & ceiling Matt Emulsion, Base A, 2.5L Soft Focus R129A
Sold & shipped by B&Q
Was £20
£
16
Save £4
£
6.40
per l
Size option
Checking availability...
Product details
Product information
- Suitable for Drywall & plasterboard
- Not stain resistant
- Surface Preparation - Apply when the temperature of the surface being painted is above 10°C. Glossy surfaces should be deglossed before painting. Repair all damaged areas before painting. Remove old, loose or flaky paint. New, fresh plaster must be sealed with Valspar® Interior Primer & Undercoat prior to painting. Other bare, absorbent surfaces must be sealed with primer or a first coat of this product prior to applying the finishing coat. The surface must be clean, dry and free of dust and grease.
- For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. Stir contents to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paint’s wet edge and finish with gentle, vertical strokes. Avoid excessive rolling or brushing. Extra coats may be required when making dramatic colour changes. Do not thin this product. Dries to the touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.
Features and benefits
- Lightweight formula
- Wipeable
- Everyday Durability
- Splatter Resistant
- Maximum Coverage
- Pure Colour HD Light Refracting Quality
- This product has a Valspar Love Your Colour Guarantee
- We want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up, so you are sure that this is the right colour for you.
- We’re unable to offer refunds or to exchange products that have been mixed to your individual requirements. If the product you purchase is faulty, or not as described, we may offer an exchange, refund or repair as appropriate. This does not affect your legal rights.
Specifications
| Brand | Valspar |
|---|---|
| Application method | Brush, roller or spray |
| Base | Water-based |
| Coverage | 10m² |
| Drying time | 2 h |
| Finish | Matt |
| Instructions for storage | Store in a cool, dry place avoiding damp areas and extreme temperatures. |
| Location | Interior |
| Maximum application temperature | 40°C |
| Minimum application temperature | 10°C |
| Minimum touch dry time | 1h |
| Paint base density | Light base |
| Recoat time | 2-4 hours |
| VOC level | Minimal |
| Volume | 2500ml |
| Product code | 5055018186838 |