Save on kitchens, bathrooms and bedrooms. Thresholds apply. Look out for the offer tag on qualifying products. Shop now >
See more Paint
Valspar Simplicity Walls & Ceilings Pure Brilliant White Matt Emulsion paint, 2.5L
Sold & shipped by B&Q
Size option
Product details
Product information
Valspar® Simplicity Walls & Ceilings is a low splatter, quick drying paint with a smooth finish, giving a great, even coverage. It’s also lightweight meaning you can achieve your new look with minimal effort, whilst being wipeable and easy to maintain. Valspar Simplicity’s water-based formula means it’s also easy to use and to clean up, so you can spend more time enjoying your transformation.
- Guarantee - Statutory
- Suitable for use on Wall & ceilings
- Surface Preparation - For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. Glossy surfaces should be deglossed before painting. Repair all damaged areas before painting. Remove old, loose or flaky paint. New, fresh plaster must be sealed with Valspar® Interior Primer & Undercoat prior to painting. Other bare, absorbent surfaces must be sealed with primer or a first coat of this product prior to applying the finishing coat.
- Instructions for Use - Stir contents to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paint’s wet edge and finish with gentle, vertical strokes. Avoid excessive rolling or brushing. Extra coats may be required when making dramatic colour changes. Do not thin this product. Dries to the touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.
- Instructions for Storage - Protect from frost
Features and benefits
- Lightweight
- Easy-to-use
- Wipeable Formula
- Stunningly Simple
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
| Brand | Valspar |
|---|---|
| Application method | Brush, roller or spray |
| Base | Water-based |
| Colour | Pure Brilliant White |
| Coverage | 25m² |
| Drying time | 2 h |
| Maximum application temperature | 25°C |
| Minimum application temperature | 10°C |
| Number of coats | 2 |
| Quick dry | Quick dry |
| Recoat time | 2-4 hours |
| VOC level | Trace |
| Volume | 2500ml |
| Washable | Scrubbable |
| Product code | 5055018187668 |