Valspar Trade Tough Pure Brilliant White Matt Emulsion paint, 10L

• Guarantee - Statutory
• Suitable for use on Wall & ceilings
• Surface Preparation - Apply when the temperature of the surface being painted is above 10°C. New plaster and other bare, absorbent surfaces must be sealed prior to painting. Remove old, loose or flaky paint and repair all damaged areas before painting. The surface must be clean, dry and free of dust and grease. Glossy surfaces should be deglossed before painting.
• Instructions for Use - For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. New plaster and other bare, absorbent surfaces must be sealed prior to painting. Remove old, loose or flaky paint and repair all damaged areas before painting. The surface must be clean, dry and free of dust and grease. Glossy surfaces should be deglossed before painting. Stir well before use to ensure paint is thoroughly mixed. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, avoiding excessive rolling or brushing, working from dry areas into the paint’s wet edge giving you a levelled finish. A tintable primer is recommended when making dramatic colour changes to avoid additional coats. Touch dry in about 1 hour. Allow 2-4 hours between coats. When using a sprayer, refer to the sprayer user guide for full instructions before use. You can dilute this paint with water, however, when you dilute the formula you dilute the quality. Therefore, we cannot guarantee the claims we make on pack if the formula is diluted with water.
• Instructions for Storage - Protect from frost

Features and benefits

• ISO 11998 Class 1 rated
• Sprayable
• Minimal VOC