See more Primers & undercoats
Walls White Primer & undercoat, 10
Product details
Product information
- Water-based
- Apply with a Brush or roller
- Suitable for Plaster & plasterboard surfaces
- Apply between 10-30°C, stir thoroughly before use. Apply 2 coats evenly using a brush or synthetic roller.
Features and benefits
This wall primer and undercoat will allow a better adhesion of paint to most interior walls including bare plaster, plasterboard and painted walls.
- Store in dry conditions between 5-30°C. Protect from frost and use within a year of opening
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
| Range | Walls |
|---|---|
| Colour | White |
| Location | Interior |
| Litre capacity (ml) | 10000ml |
| Coverage | 12m² |
| Drying time | 4 h |
| Recoat time | 2 hours |
| VOC level | Low |
| Product code | 3663602799993 |
Reviews
This is a primer, not heavily pigmented!
GiGi94 - 13 days ago
This product does what it’s supposed to do, like another reviewer said, it’s a primer not to be used specifically for full pigment coverage, just to prepare the surface for painting. Some primers/base coats are heavily pigmented, this one is not. It has a pretty decent finish and texture especially when a roller is used, suitable for putting actual paint on top and getting the best finish out of your actual paint!!! If you want a heavy coverage you need to apply quite a few coats, but as stated, it is for priming. It will look more see through when wet, and becomes more opaque when dry. This is fine for your average home renovation job!
Does as expected
C63 - 23 days ago
This is a good product. Did the job as expected. Was a bit wary initially as looked a bit watery but once dried and applied second coat as directed all good. Applied to bare plaster. No dusty residue and would recommend. This is as stated a PRIMER. Perfect for my top coat.
Does the job very well
Taxibirt - 1 month ago
I bought this primer to go onto a new plasterboard ceiling. It went on well and cover nicely. Yes it is thin but it's a PRIMER!!! It is used to PRIME not cover.
Bear this in mind and it will serve you well.
We will be using this for the rest of the house, assuming I servive the process of removing all the old plaster.
Used on plaster board as a primer
Jenny Edinburgh - 2 months ago
I bought this as a primer for plasterboard and it’s doing the job at a great price. I will do two coats of this primer and then I am putting on the pigment paint which is a colour match of farrow and ball also bought at B and Q. I plan to do two top coats of the pigment paint. I think it will deliver a good finish. So far I’m happy enough with the product. The plasterboard is thirsty, so I think I will need the whole bucket for the bedroom.
Nasty cheap garbage
Rpp - 4 months ago
Should know better at my age and after decorating so many of my own homes over the years........NEVER do it on the cheap.
This is the nastiest most horrible junk I have ever used that dries to a nasty powdery mess that covers your whole house in white powdery dust when dry!
THREE coats and you can still see every mark on the walls through it. Opposite wall was done with Dulux in one coat, needed to do the whole house so Dulux as a primer was getting expensive, so thought I would try the budget stuff. Muppet!!! Will need to go over it with a better one anyway.
Hope I can still find the receipt!
Any trades man bringing this into your house....sack them before they start!