See more Shelf supports


Right chevron


Right chevron

Furniture hardware

Right chevron

Shelf supports

Right chevron
White Steel Shelving bracket (H)250mm (D)200mm

White Steel Shelving bracket (H)250mm (D)200mm

Sorry, this product is currently out of stock.

White Steel Shelving bracket (H)250mm (D)200mm

Sold & shipped by B&Q

Left chevron
White Steel Shelving bracket (H)250mm (D)200mm
Right chevron
Checking availability...

Product details

Product information

  • Compatible with 200 to 375mm shelves
  • Locate wall studs and mark mounting locations on the top hole of the brackets, ensuring the holes are level. You should install brackets into all possible studs along the length of your shelf for stated load capacities. Partially install screw into marked holes at stud locations leaving a small gap for bracket adjustment. Place the top hole of the bracket onto screw and push down to secure. Use screws to secure the bottom of the bracket into the stud. Tighten down the top screw. Rest shelf on brackets. Use screws to secure the board to the brackets
  • Fixings sold separately

Features and benefits

The basic bracket to support all your shelving projects

  • Resistant: The epoxy finish prevents rust and ensures a long-lasting colour
  • The maximum load shown may be lower depending on wall condition. All loads should be distributed evenly


Maximum load20kg
Model name/numberOPP3
Product depth200mm
Product height250mm
Product length250mm
Product weight85g
Product width200mm
Product code3663602764519