Woodstikk D3 PVA Water Resistant Wood Glue - 1kg

Product information

Woodstikk D3 PVA Adhesive can be used for a wide range of applications within the wood and wood substitutes industry. Woodstikk D3 PVA is successfully used for different types of wood and laminates, when high water resistance D3, EN 204/205 class is needed. The product is ready-to-use and suitable for hot, cold and radio frequency cured pressing.

• Guarantee - Statutory
• Suitable for Wood
• Clean machines, equipment and tools with water before the adhesive dries. Woodstikk D3 PVA should be stored in the original containers in a cool, dry place, at a temperature range of between 5°C and 30°C. In these conditions it has a storage life of at least 6 months. Woodstikk D3 PVA must not be allowed to freeze and ideally should be warmed to at least 15°C before use.
• Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Wood, plywood, laminated plastics should be of uniform thickness. Some dense hardwoods may require sanding before bonding. For best results the moisture contents of the surfaces to be bonded should be in a range of 7 – 13%, but when pressing at temperatures above 105°C, moisture content should not exceed 10%. Moisture content variation between adjacent components should not be > 3%. Woodstikk D3 PVA should be applied evenly to one substrate using a brush, hand roller or mechanical roller. Adhesive coverage between 80 and 180g per square metre are suitable depending on the surfaces to be bonded. When bonding different timbers, such as teak and high-density hardwoods, the adhesive should be applied to both surfaces of the joint. It should be noted that adhesive spread has considerable influence on both assembly and setting times. Ideally open assembly time should not be more than 5 minutes Lay the items to be bonded together within the workable time and press them for as long a time as is needed to achieve the required handling strength. The pressure should be high enough to ensure contact of the parts over the entire area of the joint. Allow 24 hours for full strength to develop. Higher levels of water resistance form more slowly and should be tested not earlier than 7 days after bonding. Woodstikk D3 PVA, like all other PVA adhesives, may tend to show structuring especially in cold conditions. This effect is generally reversible on slight stirring. Additionally, there may be some increase in viscosity, but this will not detract from the application properties or performance.
• Causes serious eye irritation.

Features and benefits

Woodstikk D3 PVA is a single component waterbased PVA adhesive compliant with EN 204/205 D3 requirements.

• Excellent water resistance – EN204 D3
• Cures with radio frequency equipment