Yellow Zinc-plated Mild steel Corner bracket (H)1.5mm (W)51.5mm (L)50mm, Pack of 4
Product details
Product information
Product information
Fix timber together at right angles with ease with this pack of four brace brackets
Specifications
| Pack quantity | 4 |
|---|---|
| Height (mm) | 1.5mm |
| Width (mm) | 51.5mm |
| Material | Mild steel |
| Product code | 03211014 |
Manufacturer / EU responsible person
Manufacturer
Kingfisher International Products B.V.
Address
Rapenburgestraat 175, E,
Amsterdam
1011 VM
Netherlands
Contact
Reviews
1.8 / 5(5 reviews)Honestman8 - 4 / 5 - 24/06/2026
Good but too expensive.
These brackets were ideal for the job but far too expensive. I could have bought them online but I bought them here because it was convenient. L
Bex - 2 / 5 - 24/05/2026
Poor quality
The brackets bend really easily, and the screws supplied are poor quality so the heads start to sheer before the screw is fully tight. This was both with an electric drill and by hand.
Wjb95 - 1 / 5 - 04/08/2020
Terrible screws - do not buy
If I could rate these a 0 out of 5 stars. Do not buy them from b&q. 7 out of 16 heads broke off into the table I made and now there’s no way of getting them out. Cheap and rubbish.
Garybc - 1 / 5 - 01/08/2017
Poor quality screws
The screws were so poor quality. They either snapped or the heads sheared off. Don't buy these if you want them to screw into anything but very soft wood!
Will18358 - 1 / 5 - 23/07/2017
Very poor technical spec?
Came on here to place an order! but the technical spec on these brackets is obviously wrong??? Come on B&Q people want to know the correct dimensions for these products ie, the width as well, it is no good ordering a certain size timber, then finding these brackets are wider!