Zinc-plated Metal Flush Door hinge N177 (L)50mm (W)50mm, Pack of 8
Product details
Product information
These zinc effect metal flush hinges are suitable for use on small cupboard/louvre doors. Fixings supplied for quick and simple installation.
- Only fixings included
Specifications
| Pack quantity | 8 |
|---|---|
| Hinge type | Flush |
| Location | Internal |
| Plating | Zinc-plated |
| Product length | 50mm |
| Product width | 50mm |
| Material | Metal |
| Product code | 03207543 |
Reviews
1.37 / 5(8 reviews)wren77198 - 3 / 5 - 10/05/2023
Hinges
Hinges were fine. Screws not great and had to provide my own. Hinges for the doors to cupboard required do the job. Price ok but had to spend extra on screws that worked.
mattnnnnnn - 1 / 5 - 15/08/2021
Offensively bad
I know they say you get what you pay for, but I was left wondering who I’d wronged in a previous life-time to have be subjected to the horror of these hinges. They really shouldn’t be on sale. Of the “usable” hinges that weren’t corroded. Not a single on was straight, the screws appear to be made from plasticine, all of them rounded off at the head except one little fella that decided to sheer off when I breathed on it. Luckily I’m left with 6 “usual” hinges which require opening with the brute force strength of a moderately irritated Rhino Seriously, who manufactures this product? I’d like to have a word as they clearly have a promising future in eating crayons.
DT70 - 1 / 5 - 01/07/2021
Appalling quality!
Out of a pack of eight, only two hinges actually worked and then not particularly well. All of the screw holes were not sufficiently countersunk so impossible to get them flush. Quite possibly the worst product I have ever bought in fifty years of DI
BYou - 1 / 5 - 26/07/2020
7 out of 8 in the pack are not fit for purpose
Very poor material and manufacturing. Only one hinge in the pack of 8 moves freely. Others are either trying to push against a bent central pin, or are tightly squeezed and rub against the pin head and between what should be moving parts. The amount of pressure needed to open them is excessive.
JazzyJack - 1 / 5 - 29/05/2020
Terrible hinge
Beware.....the hinges that you get are not the hinges that are shown in the picture. They are disgraceful. Not one single hinge is straight. The manufacturing process has left them with score marks that will be visible when in place. Avoid at all costs.
xwthbo - 1 / 5 - 11/11/2018
Cheap, nasty and not fit for purpose
Out of a pack of 8, only 3 hinges open & close smoothly and squarely, the pin is bent in the rest of them preventing them from moving squarely in those that do move. The screws are so soft that they can’t be used and they’re all different sizes too some with a thread some with a hint of one. Not happy.
nalimugmug - 1 / 5 - 14/09/2017
Cheap and nasty
Screw heads are made of cheese, rounded off with only slight pressure on bit. Countersunk holes will allow head of screw, if you can get it that far to pass right through.
Retired Mal - 2 / 5 - 24/03/2017
Poor quality flush hinges!
I bought these hinges for hanging a pair of MDF doors to an MDF carcass. These hinges and their screws are of poor quality in their manufacture. Some of the screw heads are of different diameter and so some fall through the hinge holes. The hinge holes haven't been countersunk enough to allow the top of the screws to fit flush with the face of the hinge! So when doors are fitted they do not close fully due to the screw head binding with the opposing MDF (door and carcass). Tried countersinking the hinge holes to improve this but was not very effective. Taking back for a refund. Recommend not to buy if you want good fitting doors