Zinsser AllCoat Exterior Black Satin Multi-surface Primer & paint Paint, 2.5L Tin

Product information

Zinsser AllCoat® Exterior Black is an ultimate performance, mould-resistant paint, that offers supreme protection to all exterior surfaces. It forms a vapour-permeable, low maintenance, water-shedding coating that is recoatable in 3 hours. This exterior paint is self-priming and can be applied to previously painted surfaces without sanding. It gives excellent resistance against cracking, blistering and flaking. The tough finish is resistant to rain and severe weather and offers excellent colour retention.

• Guarantee - Statutory
• Suitable for Wood
• Surface Preparation - Surfaces should be clean, dry, sound, and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre-1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting. Ensure the surface is completely dry before painting, for porous surfaces such as timber or masonry we recommend that the moisture content of the substrate should not exceed 12%. Timber at risk from decay or insect attack should be treated with an appropriate preservative. Prime any bare ferrous metal with an anti-corrosive metal primer. Abrade and degrease unweathered powder coatings.
• Instructions for Use - Shake or stir well before using. Apply with synthetic bristle brush, roller, or sprayer. For airless spraying, use a .017” tip and high-medium (2000-2500 PSI) pressure. Ensure air and surface temperature are between 10° & 32°C and humidity is less than 85% during application and cure of the product. Avoid painting in direct sunlight and maintain a “wet edge” to avoid lapping. Ensure conditions during application and cure are favourable, do not apply if there is a likelihood of rain, frost, fog, or condensation affecting the freshly applied paint before it has fully cured.

Features and benefits

• Multi surface application
• Excellent colour retention
• Weather resistant
• Recoat time - 3 hours
• 15 year performance
• Can be applied to 5ºC
• Resistant to showers after 1 hour