See more Primers & Undercoats
Zinsser B-I-N White Multi-surface Matt Primer, 2.5
- Apply with a Brush or roller
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Litre capacity (ml)||2500ml|
|Drying time||15 min|
|Recoat time||45 minutes|
Bin the rest this is best
Rds66 - 3 months ago
Started to decorate one of my bedrooms and decided to really give it the works. Stripped it back and as there was a little damp in one of the corners looked for something to put on as a primer. Decided on this after checking reviews on here and other sites.
This stuff is the bizz. Love it. A word of warning it pours if using a roller as I did like milk so be careful. Has the colour of cream. I would advise using a short pile roller with this stuff and be prepared. You must work quickly and don't be too fussy.
Overall I am very happy and will be using zinsser again as I'm on to the hall next. By the way I'm a working guy but not a painter or decorator so this is my review on how it worked for me. One final thing it's says hazardous on the label for a reason so open the windows when using this stuff I also wore a mask.
Covers melamine surfaces
Maidformakeup - 5 months ago
Used this to prime some hideous, but functional, melamine wardrobes. Once done I wallpapered them and this stuff allowed the glue to sick. Like previous reviewer says, it’s a bit like glue - copydex springs to mind- and looks very patchy and streaky. BUT it’s primer and so is covered over. It’s brilliant in my opinion.
Go to problem surface primer
dickyleg - 8 months ago
A great primer for finishes that are difficult to repaint e.g. varnish, washable paint etc.
It is easy to apply but you can't work it around like other paint as the alcohol base soon dries out and it gets thick very quickly - you soon learn a technique though, but keep the layer even and dont be be too fussy about what it looks like. Ive used this time and time again.
This Stuff Works!
CaptainBob - 2 years ago
Bought this after six coats of emulsion failed to cover up old water damaged paintwork. One coat of this sorted it.
And it smells good too!
Did the job
GReb - 2 years ago
I bought this sealer following a recommendation to prime some old solid mahogany utility room cupboard doors before spraying them a much lighter colour. My hope was that by spraying a top colour I would minimise paintbrush marks on the finished product and achieve a more professional finish. Although appearing pretty thin in the tin the primer became very sticky almost immediately after contact with doors. Painting was akin to working with a form of glue. Coverage was pretty good but achieving a consistent smooth result I found almost impossible. Two coats were necessary but I was dissapointed with the result and found myself sanding down paint ridges some days later before final topcoats. Cleaning brushes was far from easy and really failed despite trying turps, white spirit and even petrol. Threw the brushes away. Job now complete and although acceptable there remains uneven evidence of base layer. Whether it does the job of providing good primer functionality remains to be tested in the utility room environment.