Bestway Flowclear 330 gal Capacity Filter Pump For Swimming Pool, Grey

Thinking of upgrading your outdoor swimming pool experience? If your above-ground pool isn't part of a set that already includes a filter pump, the Flowclear filter pump is an essential piece of kit. Unless you want to constantly be replacing your swimming pool water, which can be costly and time-consuming, you will need some sort of pool filter system to keep your water clean and clear of debris. Filtre cartridge pumps are an economical and convenient way to keep your pool water clean and are so simple to set up.

Features:

Pump’s water flow rate (pump capacity): 1,249 L/h (330 gal./h)

Integrated pool system water flow rate (system flow rate): 1,060 L/h (280 gal./h)

Installation:

PART I Internal Filter Pump Inspection: Remove the Filter Cap by unscrewing the Filter Cap Retainer. Inspect the Filter Cartridge ensuring it is centred in the Filter Pump. After inspection, check that the Filter Cap Seal is in place, replace the Filter Cap and screw the Filter Cap Retainer into position.

PART II Attach the Hoses to the Filter Pump and the Pool:  Place the loose Hose Clamps on both ends of the Hoses. Attach the Hoses to the corresponding letters on both the pool and the Filter Pump (A to A, B to B). Tighten the Hose Clamps to the Filter Pump by screwing the fly nut clockwise. Remove the Stopper Plugs from the pool’s Inlet and Outlet Valves and insert the Debris Screens. With the Hoses and the Debris Screens in position, tighten the Hose Clamps.

PART III Preparing the System for Use: Open/unscrew the Air Purge Valve on the top of the Filter Pump; the air is released as water fills the Filter Pump. When water comes out of the Air Purge Valve screw it closed and wipe away any water. To start the Filter Pump, Insert the plug of the filter pump into a residual current device (RCD).

Box Contains:

Filter Pump Comes with all hoses and attachments

Installation and safety instructions