Brookvent Aircycle 1.2 Ceiling Mounted Summer Bypass Whole House MVHR System

Combining market leading heat exchange efficiency with extremely low energy usage,

the aircycle 1.2 provides superior air comfort levels whilst minimising heat wastage.

The aircycle 1.2 operates by recovering heat from air that would normally be expelled into the

atmosphere. This heat is transferred to fresh air drawn into the property, which is then filtered and

distributed throughout.

The aircycle 1.2 can significantly reduce the space heating bill of a domestic dwelling, whilst also

delivering a healthier and more comfortable environment for the occupier. The aircycle 1.2 eliminates

many issues caused by poor indoor air quality within the home such as condensation and the

resultant formation of ‘black mould’. Additionally, the advanced air filtration system ensures the home

environment is much more conducive to allergy and asthma sufferers alike.

This model is fitted with the optional summer bypass.

Dimensions 583mm x 600mm x 337mm

Weight 12kg

Materials Main enclosure: Impact Resistant EPP (Expanded Polypropylene)

PCB Enclosure: Nylon 6 V0

Drainage Tray: HIPS

Filters: Polyester Media (G2/3)

Mounting Bracket: Zinc Plated Steel

Electrical 240V EC

EC Low Energy Fans

Supplied with a flying lead

Controls Extremely efficient in-built control board (SAP Q Approved)

Independent Fan Speed Control (Trickle and boost settings for each fan)

Single 240v boost input (Light Switch, Humidistat, PIR, etc) 15 Min Over-run

In-built Humidity Sensor (Boost activation) Variable: 60% - 90% RH, Factory Set: 70%

Frost Protection, Variable Activation: 0 – 10 Degrees Cel., Factory Set: 5 Degrees Cel.

‘Tempering’ Summer Bypass (Variable between 20 and 27 Degrees Cel.)

Installation: Ceiling mount

Standards Fully complies with Building Regulations for UK & Ireland | SAP Q Approved

Energy Savings Trust Best Practice | CE

Specific Fan Power: From 0.53 w/l/s

Heat Recovery Efficiency: Up to 93% Efficiency

Guarantee Period: 5 Years