CED IR1200 Quartz Infra Red Wall Mounted Heater 2 Heat Settings 600W/1200W

• Guarantee - 1 year
• No overheat protection
• Fittings & fixings included
• 2 heat settings

Features and benefits

• Choice of operating as 600 watt (1 bar)or 1200W (2 bar) selected by operating pull switch. The pull cord also switches the heater off
• Mechanical flag indication of how many bars selected. This heater must be mounted on wall. The bracket is adjustable for direction. The heater must be mounted a minimum of 1.8 metres from the floor, 400mm from the ceiling and 200mm from objects either side
• If fitted in a bathroom the heater must be at least 600mm from the edge of bath, shower or top of handbasin. All electrical equipment located in a bathroom must be protected by a 30mA RCD or RCBO device for safety
• Designed for fixed installation, so does not come fitted with a plug. For intermittent use in domestic locations only. Not suitable for continual use in commercial locations.
• 600mm long pull cord. 1.3m long cable
• Dimensions: 540mm wide x 130mm high x 135mm deep (fully tilted).Suitable for indoor use only. IP24.
• Approved to BS EN60335-2. UKCA & CE certified