See more Chucks, keys & holders
Charnwood CDC25 Crown Drive Centre For Chucks 25mm diameter
Sold & shipped by Charnwood Machinery
Available online only and not stocked in B&Q stores
£
29
Checking availability...
Product details
Product information
Turn spindles without removing your chuck from the lathe using this chuck drive centre.
The sharp point in the centre is spring loaded and retracts as pressure is applied from the tail stock.
The ring of 20 sharp teeth then create an extremely powerful grip.
Diameter of Crown Teeth 20mm (3/4″)
Diameter of body 25mm (1″)
Overall Length 55mm (2″)
Diameter of Chuck Insert End 19mm (3/4″)
Width of Jaw Clamping Channel 9mm (3/8″)
Can be matched with our 25mm Revolving crown centre, for spindle turning.
For use with Charnwood W836, W840, Viper 2, Viper 3, Viper 5 & Nexus 3 chucks plus most other makes.
- Guarantee - 1 year
Features and benefits
- Turn spindles without removing your chuck from the lathe using this chuck drive centre.
- The sharp point in the centre is spring loaded and retracts as pressure is applied from the tail stock.
- The ring of 20 sharp teeth then create an extremely powerful grip.
- Can be matched with our 25mm Revolving crown centre, for spindle turning.
- For use with Charnwood W836, W840, Viper 2, Viper 3, Viper 5 & Nexus 3 chucks plus most other makes.
Specifications
Brand | Charnwood |
---|---|
Model name/number | CDC25 |
Number of pieces | 1 |
Pack quantity | 1 |
Product code | 5060486047024 |