Clover Chemicals Targ Graffiti Remover 5l

A fast-acting, water-rinsable graffiti remover designed to give a wide range of solvency against paints and inks.

A light brown, low viscosity liquid, Targ is a product with a very low odour.

Dissolves all types of graffiti; spray paints, felt tip pen, ball point pen, pencil and crayon.

Suitable for use on all solvent resistant surfaces. ie. metal, glass, stone, wood, porcelain, brick and ceramic tiles.

Always test the resistance of a surface to TARG (graffiti remover) before commencing work as any damage will be irreversible.

Put on work clothes, gloves and safety glasses before commencing work. Pour TARG in to an open top container. Use a paint brush to apply the TARG to the surface, thoroughly wetting the affected area. Allow to penetrate for a few minutes and then agitate with an abrasive pad. Once the graffiti is dissolved wash or wipe away with clean water.

On more porous surfaces use a brush to agitate the surface and remove graffiti from within the pores of the surface.

To remove graffiti from gloss paint - Brush TARG on to the surface and agitate with an abrasive pad to loosen the graffiti. Immediately rinse with plenty of clean water to stop the action of TARG.