Drill pump heavy duty for oil and fluids suitable for all drills

Professional tool for commercial or occasional use. For use with any power drill electric / air or battery (please be aware that the slower the drill though the slower the liquid will flow, wont work to its optimum capacity. Suitable for all fluids and oils. Fitted with an 6mm drill shaft so any 3/8" or 1/2" chuck will fit. Maximum output of 1500 litres per hour working at a speed of 3,000 RPM Maximum pumping height of 15 metres. Maximum output pressure of 3 bar @ 3000 RPM. Maximum height for pump above liquid to be pumped 300cm. Self priming up to 30cm above the liquid. The ends of the pump have 1/2" hose barb on. Hose can be fitted directly on and can be secured with a hose clip. however normally a hose clip is not necessary. Please note; This pump is not suitable for pumping petrol. The pump would handle the fluid but there is a risk of sparks from the drill motor (even on air drills) so should not be used.