Flat Bracket 2.5mm Heavy Duty Connecting Joining Plate Galvanised Steel Sheet

These flat jointing plates are extremely heavy duty due to being made out of 2.5mm steel. Plenty of holes throughout their surface allow for a quick and easy installation.

Application: They are fitted with a wide range of perforating systems which enable them to be used in standard solutions as well as for custom-made joints. Material: DX51D + Z275 Thickness: 2,5mm

Fixing: Carpentry nails ANCHOR ø4; screws for timber ø6, ø10; bolts M10, M12; concrete anchors M6, M12.

Standard flat connectors with versatile perforation. The number of openings placed in them ensures that these flat bracket help to complete many simple as well as complex connections. Often used for mounting roof trusses.

Flat sections or simply flats are applied in connections where lateral surfaces of connected elements are in the same plane.They are usually used in pairs and placed on both sides of a joint.They are smoothly finished which enables them to be applied both inside and outside of the connection

Material: Cold-rolled metal sheet with bilaterally applied galvanised coating with weight no less than 275 g/m2 and thickness of about 20 um. Most often it is additionally covered with a thin layer of oil film that protects zinc against oxidation. Product edges remain not coated after punching process, but it has no negative influence on their anti-corrosion protection.

Steel sheet with thickness 2,5 mm.

Anti-corrosion protection: Zinc-coated min 20 um

European Technical Approval

EN14545:2011