GLEAN Patio Grout Resin Residue Remover - Removes Acrylic, Epoxy and Silicone Residue From Brush-in Jointing Compounds - 1 Litre

GLEAN Patio Grout Resin Residue Remover is specifically designed to tackle epoxy, acrylic, and silicone residues commonly left behind by cement-free brush-in jointing compounds. The advanced, non-caustic formula softens hardened residue making removal quick and easy. The non-drip formula is safe for use on Natural Stone and Porcelain paving and is suitable for interior and exterior use. SHAKE WELL BEFORE USE: Shake bottle well before use. Always test on an inconspicuous area prior to general use. PREPARATION: Ensure that the surface to be treated is completely clean and dry. If necessary, first wash the surface with GLEAN Heavy Duty Floor & Stone Degreaser. Rinse well with water to finish and leave to dry. REMOVING RESIDUE: Apply generously by dabbing or rolling onto the surface. Work in manageable areas at a time and do not brush out. Leave for up to 30 minutes. If drying should occur within 30 minutes apply a little more solution to keep it wet. Use a stiff short haired brush or nylon scrubbing pad to remove the softened residues from the surface. Add a little water and scrub again. Extract the released residues using a sponge or wet vac and rinse with water. Repeat the process if unwanted material remains. TO FINISH: Use GLEAN Heavy Duty Floor & Stone Degreaser diluted 1: 5 in warm water. Apply with a light pressure sprayer or watering can. Agitate the surface using a deck brush or nylon scrubbing pad. Rinse by hosing off thoroughly with clean water. *Do not apply during rain, frost or when surface air temperature is under 5C or over 30C. Use gloves and protective googles if there is a risk of direct contact or splashing.