HG Parquet Protector Gloss (Product 51) 1 Litre

• Guarantee - Statutory
• Use on Parquet
• Instructions for Use - In case of new varnish, wait for at least 7 days before applying HG Parquet Protector Gloss. Old existing varnish should be cleaned thoroughly with HG Parquet Cleaner Extra Strong. Allow sufficient drying time. Apply HG Parquet Protector Gloss evenly and thinly in one direction with a clean, damp, Non-Fluffy Cloth wrapped around a Floor Wiper. After approx. 45 minutes the HG Parquet Protector Gloss will be dry and a second layer (for instance for even more gloss or higher resistancy to stains) can be applied at right angles to the first layer. After around 3 hours the floor can be walked on and after 3 days the layer is completely hardened. Coverage: 1 litre for approx. 40 m² (20 m² if two coats applied) Maintenance: For cleaning floors treated with HG Parquet Protector Gloss use HG Parquet Cleaner. To clean and restore the shine use HG Parquet Cleaner Shine Restorer. As soon as dull patches appear, apply a new layer of HG Parquet Protector Gloss. After 5 or 6 of such treatments the HG Parquet Protector Gloss layer should be removed with HG Parquet Cleaner Extra Strong. Attention: Do not apply HG Parquet Protector Gloss to veneer parquets, laminate parquets, 'clickable' parquets and any other floors that are not completely lacquered all over. In case the seams are not completely closed, swelling may occur. Please use HG Laminate Care Products for these kind of parquets.
• Guarantee - Statutory

Features and benefits

HG Parquet Protector Gloss protects varnished parquet against scratching, penetrating dirt and wear.

• Gives a sheen as well as an anti-skid effect
• Can be easily re-applied again and again
• Highly effective against stains