See more Cleaning products

Home

Right chevron

Home furnishings

Right chevron

Household cleaning

Right chevron

Cleaning products

Right chevron
icons.title_zoominicons.title_zoomouticons.title_zoomreset
HG Tile Cement Grout and Mortar Remover (Product 12) 1 Litre

HG Tile Cement Grout and Mortar Remover (Product 12) 1 Litre

Sold & shipped by Homecare Essentials Ltd

Available online only and not stocked in B&Q stores

£
15.49
£
15.49
per L
Loading
Checking availability...

Product details

Product information

    HG Tile Cement Grout and Mortar Remover cleans off stubborn cement film, mortar residues and white salt deposits (efflorescence) from ceramic and porcelain tiles, flagstones, terracotta, quarry tiles, victorian tiles, brick, concrete and any other non-calcareous natural stone such as Norwegian Slate and some types of Granite. It's especially suitable for porous and rough textured floors and walls.

    IMPORTANT: DO NOT apply HG Tile Cement Grout and Mortar Remover to calciferous natural stone such as marble, travertine, blue (hard)stone, several types of slate, terrazzo, granito, basaslt and cement tiles. Use HG Natural Stone Cement and Lime Film Remover. If in doubt test on an inconspicuous area first or use HG Hagesan Natural Stone Cement Grout Film Remover.

    When using this product we recommend using Eye Protection and an Odour Respirator (for poorly vented areas) as well as protective gloves.

    It is recommended to use HG Hagesan Tile Cleaner on floors when cleaning for the first time to remove the very last remains of cement after using HG Tile Cement Grout and Mortar Remover.

    Coverage: 1 litre is enough for a surface area of approx. 20 to 40 m².

    • Guarantee - Statutory
    • Use on Cement , grout and mortar floors
    • Instructions for Use - Directions for use: *Efflorescence is caused by soluble salts in building materials, or soluble salts transferred into building materials by water, being drawn towards a drying surface by the movement of water. At the surface of the building material the water responsible for the transportation of the salts evaporates leaving behind the salts as a surface deposit. Dilution: Depending on the degree of residues dilute HG Tile Cement Grout and Mortar Remover from 1:4 to 1:10 with water. Directions for use: Try HG Tile Cement Grout and Mortar Remover on a small inconspicuous area first. Wet the surface down with clean water before using. Then apply and spread the diluted HG Tile Cement Grout and Mortar Remover with a scrubbing brush or pad. Leave to work for a couple of minutes. Scrub thoroughly till clean then rinse off with plenty of water. Repeat treatment with HG Tile Cement Grout and Mortar Remover if necessary. Coverage: 1 litre is enough for a surface area of approx. 20 to 40 m². Attention: DO NOT apply HG Tile Cement Grout and Mortar Remover to calciferous natural stone such as marble, travertine, blue (hard)stone, slate, terazzo, granito, basaslt and cement tiles. Use HG Natural Stone Cement Grout Film Remover. The use of HG Tile Cement Grout and Mortar Remover may lighten the colour of the grout/cement.
    • Guarantee - Statutory

    Features and benefits

      HGTile Cement Grout and Mortar Remover cleans off stubborn cement film, mortar residues and white salt deposits (efflorescence) from ceramic and porcelain tiles, flagstones, terracotta, quarry tiles, victorian tiles, brick, concrete and any other non-calcareous natural stone such as Norwegian Slate and some types of Granite.

      • Cleans off stubborn cement film, mortar residues and white salt deposits
      • For ceramic and porcelain tiles, flagstones, terracotta, quarry tiles, victorian tiles, brick, concrete and any other non-calcareous natural stone such as Norwegian Slate and some types of Granite.

      Specifications

      BrandHG
      Container typeBottle
      Model name/numberProduct 12
      Pack quantity1
      Volume1L
      Product code8711577002121